Spare parts and accessories
Refine Search
Fixture 3E642E.P31
The tailstock with adjustable height of the centers 3E642E.P31 is designed to support the tail part of the conical tool when sharpening it on the fron..
Back end head. Adaptation VZ-318.P3
It is designed to support the center tool when it is sharpened on the working mandrel. In the case 1 of the headstock, there is a pinot..
Bracket 3M642E.92.014
Designed to fix the protective covers on the spindle of the machine model 3E642, 3E642E. ..
Casing VZ-319.92.010
The grinding wheel casing is designed to protect the worker from abrasive dust and splinters of the grinding wheel in case of its destructio..
Collet chuck VZ-318.P41-02
The device is intended for clamping in the universal head VZ-318.P1 end tool with a cylindrical shank. Wide-angle collets (Ø 3-20 mm ..
Device for cylindrical grinding of twist drills VZ-318.P10
It is intended for cylindrical sharpening of a surface of back corners of the right spiral drills with a cylindrical shank, and also drills ..
Device for grinding spiral tool VZ-318.P26
The device is intended for sharpening on grinding machines of models VZ-318, VZ-318E, VZ-818, VZ-818E worm cutters accordin..
Device for linear wheel dressing and installation centres VZ-318.P5
Designed for linear corrections of circles with a diamond pencil or amazonamerican and install the prop on the axle centers of the universal..
Device for sharpening a cutting end mills VZ-318.P53
Designed for sharpening cutters according to GOST 2679-93 separately on the front and rear surfaces. The sharpened cutter is installed ei..
Device for sharpening circular saws on the end face of the teeth of the VZ-318.P56
The device is designed for sharpening circular saws at the end of the teeth. Install the saw. Set the sharpened tooth surface parallel to..
Device for sharpening drills with the center and cuts VZ-384.P15
Device for sharpening drills with center and undercutters. The device is installed on the upper transverse table of the machine. The dril..
Device for sharpening helical dalbekov 3E642E.P23
Designed for sharpening hammers according to GOST 10059-80 and 9323-79 on the front surface. Principle of operation : Sharpenin..
Device universal for wheel dressing 3E642E.P25
Is designed for straightening radius, a straight line. The device is mounted on the grinding head. The diamond pencil moves in two mutual..
Dust Collector For Wood Shavings VZ-576
In enterprises working with an abrasive tool, a dust extracting device should be used to protect workers' airways. OJSC "VIZAS&q..
Dust Collector V19-101
The electric vacuum cleaner of model B19-101 is used for catching abrasive and metallic dust on grinding machines and other machines working..