+375 212 55-10-37
+375 212 55-31-45
РБ г.Витебск
пр-т Фрунзе, 83
  • Device for sharpening helical dalbekov 3E642E.P23


Designed for sharpening hammers according to GOST 10059-80 and 9323-79 on the front surface.

Principle of operation :

Sharpening helical cutter is mounted directly or on a mandrel in the spindle of the fixture. The spindle is rotated by an angle corresponding to the angle of inclination of the teeth. With the stop and retainer kit (relevant module shaping cutter) oriented cutter. The axis of the grinding wheel is horizontal and perpendicular to the direction of longitudinal movement of the table. Sharpen the current tooth. Remove the lock, divided into a tooth, enter the lock into the cavity and sharpen the next tooth.


The parameters marked with (*) are specified at the stage of the technical task coordination.


Spindle taper     Morse B24 AT6
Angle of rotation in the vertical plane, deg. 45
Maximum diameter of hammocks  100
Overall dimensions (LxWxH), mm 410х147х222


Write a review

Note: HTML is not translated!
    Bad           Good

Device for sharpening helical dalbekov 3E642E.P23

  • Product Code: 3E642E.P23
  • Availability: In Stock