Телефон:
+375 212 55-10-37
+375 212 55-31-45
Адрес:
РБ г.Витебск
пр-т Фрунзе, 83
ru
СТАНКОТОРГОВАЯ КОМПАНИЯ ВИЗМАШ
  • Device for sharpening a cutting end mills VZ-318.P53

 

Designed for sharpening cutters according to GOST 2679-93 separately on the front and rear surfaces.

The sharpened cutter is installed either on the spindle or on the flanges of a set of replaceable parts. Sharpening on the front surface: put the edge of the feed dog relative to the cutting edge of the tooth; the handle is set the front angle on the scale; set the tooth pitch with a movable stop; brings the circle to touch with the front surface; feed on the rotation of the cutter is set by the transverse movement of the grinding head. The sharpening on the back surface: the exposed edge of the feed dog relative to the cutting edge of the tooth; install the rear angle on the scale; the tooth pitch is set using a movable stop; the circle is brought to the touch with the back surface; the feed to the cutter rotation is set by the transverse movement of the grinding head.

The parameters marked with (*) are specified at the stage of the technical task coordination.

 

The greatest angle of sharpening of the cutter, the back/forward deg.                     20/10
Overall dimensions (LxWxH), mm 248х238х207

 

Write a review

Note: HTML is not translated!
    Bad           Good
basic_captcha

Device for sharpening a cutting end mills VZ-318.P53

  • Product Code: VZ-318.P53
  • Availability: In Stock